Mobihel > Coating systems > Preparation of different substrates
  • Increase distance between lines.
  • Increase writing
  • Decrease writing
  • Print

Preparation of different substrates

Preparation of different substrates


SUBSTRATE
SANDING AND CLEANING
Old lacquer Polishing or sanding, paper of granulation from P360 - P400, then clean with MOBIHEL Antisilicone cleaner low VOC or MOBIHEL HYDRO Degreaser.
Steel sheet metal Polishing with paper of granulation P120- P180 and cleaning with MOBIHEL Antisilicone cleaner low VOC or MOBIHEL HYDRO Degreaser.
Zinc-plated sheet metal Polishing with Scott breit and cleaning with MOBIHEL Antisilicone cleaner low VOC.
Aluminium Clean with MOBIHEL Antisilicone cleaner low VOC or MOBIHEL HYDRO Degreaser, sand with fine sand paper P400 - P600 and again clean with MOBIHEL Antisilicone cleaner low VOC or MOBIHEL HYDRO Degreaser.
Plastic Cleaning with MOBIHEL Cleaner for plastic low VOC.

Levelling of sheet metal

SUBSTRATE PUTTY FILLER
Old lacquer

or

Steel sheet metal


 

MOBIHEL PE putty or
MOBIHEL PE putty multi
or
MOBIHEL PE putty soft or
MOBIHEL PE putty light weight or
MOBIHEL PE putty ALU
MOBIHEL 2K filler 3:1 univerzal low VOC or
MOBIHEL 2K HS 4:1 compactprimer low VOC

 
Zinc plated sheet metal MOBIHEL PE putty multi or
MOBIHEL PE putty light weight
MOBIHEL 2K filler 3:1 univerzal low VOC or
MOBIHEL 2K HS 4:1 compactprimer low VOC
Aluminium MOBIHEL PE putty multi or
MOBIHEL PE putty light weight
MOBIHEL 2K filler 3:1 univerzal low VOC
or
MOBIHEL Primer low VOC and
MOBIHEL 2K HS 4:1 compactprimer low VOC
Plastic MOBIHEL PE putty for plastic MOBIHEL Primer for plastic low VOC and
MOBIHEL 2K HS 4:1 compactprimer low VOC