Use:

The product contains special fillers, which reduce density by approx. 30 % in comparison to other PE putties. It has excellent applicative characteristics: it is easier to form and to even out irregularities, it is distinguished for excellent sanding.
The application is possible also at lower temperatures 12 – 15 ºC, then it is necessary to add approx. 2,5 % of hardner (by weight) and the drying time will be prolonged to approx. 30 – 45 min.
Economical use; (1 weight part of putty has by 30% larger volume if compared to standard PE putty), less waste.

Substrate:

- sanded and cleaned steel surface
- fine sanded aluminium
- slightly sanded zinc plated sheet
- thoroughly dried through and sanded filler
- it should not be applied to acid or alkyd primer

Colour shade:

light grey