Mobihel > Products > Top coatings - two-component coatings > MOBIHEL 2K acrylic enamel MIX
  • Increase distance between lines.
  • Increase writing
  • Decrease writing
  • Print

MOBIHEL 2K acrylic enamel MIX


Use:

The prepared MOBIHEL 2K acrylic car enamel will be used for for final painting of personal and other vehicles as well as for other metal objects.
The adequate colour shade of MOBIHEL 2K acrylic car enamel we choose by means of MOBIHEL colour card or tinting on colour substrate. The basis is the mixing unit, supported with MOBIHEL computer weighing programme.

Surface:

- sheet metal protected with MOBIHEL 2K sealer 3:1 universal low VOC or
- sheet metal protected with MOBIHEL 2K HS 4:1 compactprimer low VOC


MIX-101 – MIX-131

MOBIHEL computer weighing programme 

Mixure ratio 2:1

MOBIHEL 2K hardener 9900 or 1100 (for T applications from 18 – 27 °C) or
MOBIHEL 2K hardener 1300 (for T applications from 27 – 35 °C) or
MOBIHEL 2K hardener 1500 (for T applications from 5 – 18 °C)
Pot life: 2 hours / 20 °C

18 – 20 seconds
DIN 53211 ø 4 mm / 20 °C
- MOBIHEL 2K thinner 2100 (for T aplications from 18 – 27 °C) or
- MOBIHEL 2K thinner 2300 (for temperature applications 27 – 35 °C) or
- MOBIHEL 2K thinner 2500 (for temperature applications 5 – 18 °C)

The paint colour should be applied on to a piece of test cardboard to assess its suitability prior to application on the object. 

1,3 – 1,4 mm
2 – 4 bar
2 – 3x = 50 – 60 µm

10 min. / 20 °C
between coats

20 °C = 16 hours
60 °C = 30 minutes

2K-materials react with moisture; take care that all containers and utensils are absolutely free from water. While coating, the ambient relative humidity should not exceed 80 %!

4 years